Product Description:

The Viking E-10 (Currently the E-10A Model) is a telephone line powered speaker phone designed to provide two-way handsfree communication. When the Call button is pressed, the E-10A will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect.

The Viking E-10 can be connected directly to a C.O. line or analog PABX/KSU station when programmed as a ringdown circuit, or used with a Viking Hot-Line Dialer. If a line or station is not available, Vikings DLE-200B ring down circuit can be used. One, or up to four, E-10A speaker phones can share an existing phone line in a house or small business when used with a Viking C-200 or C-2000A (respectively) Entry Phone Controllers.

For outdoor or harsh environments, the E-10 models are available with Enhanced Weather Protection (EWP). The E-10A-EWP features rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled tip and ring connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.

Viking E-10 Speakerphone Phonebox Product Brochure: (PDF)

Applications


Commercial, industrial and residential door security
Door or gate communication
Business delivery entrances
Use in conjunction with a Viking K-1900-5 Dialer on C.O. lines or analog PABX/KSU stations
Use on any programmed ringdown circuit of an analog PABX/KSU station

Viking E-10 Features


Alternate action call button to place or cancel a call
Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
Telephone line powered
Weather resistant features: mylar speaker, gaskets, internally sealed push button switch, UV stable exterior, enamel coated PCB
Optional Enhanced Weather Protection (EWP) available for greater weather resistance
Adjustable microphone and speaker volume
Programmable maximum call length
Selectable auto-answer feature allows remote monitoring
Two way handsfree communication
Programmable VOX (mic/speaker) switching speed
E-10/E-10-EWP Features:

- Vandal resistant, black powder painted, aluminum face plate with heavy duty metal call button and mounting gasket
- Flush mountable using included plastic rough-in box part # 259576
- Surface mountable with an optional VE-5x5

Viking E-10 Specifications


Power: Telephone line powered (18 VDC/20mA minimum)
E-10 Dimensions: Overall: 127mm x 127mm x 57.2mm (5 x 5 x 2.25), Rough-in box: 102mm x 102mm x 57mm (4 x 4 x 2.25) E-20A Dimensions: 140mm x 115mm x 38mm (5.5 x 4.5 x 1.5)
Shipping Weights: E-10: 0.91 kg (2 lbs), E-20A: .75 kg (1.5 lbs)
Standard E-10/E-20A Environment: -26 C to 54 C (-15 F to 130 F) with 5% to 95% non-condensing humidity
E-10/E-20A-EWP Environment: -26 C to 54 C (-15 F to 130F) with up to 100% condensing humidity
Speaker Volume: Approximately 70db maximum @ 1m
Ring Voltage: 25V AC RMS minimum
CPC Disconnect Time: 300ms minimum
REN: 0.8A
Standard Connections: (1) 2-position terminal block
EWP Connections: (2) gel-filled butt connectors

More Viking Accessories